#422.01.0210.07
#422.01.0310.07
H Series
Hydrogen Generator
DESCRIPTION
The H Series is available in three models, 200, 400, or 600 mL/min, with purity up to 99.9999%. They are designed for Carrier Gas in GC, GC-MSD, and "FAST GC" applications. The safety system features acoustic alarms, screen messages, and automatic production stoppage for gas leaks using inert gas. The H Series features a removable water tank for easy water changes and cleaning. Maintenance is easy, with low cost consumables that are easy to replace. Hydrogen is produced in proportion to consumption, with minimum gas storage inside the instrument. Parallel connection allows for a configuration of up to four stackable towers. It features a CPU with touch screen display, which can be linked to a generator using CAN-BUS. This enables monitoring of the operating status and provides access to the maintenance menu, alarm reports, and functional parameters.
Removable Water Tank
For easy cleaning and water changes. Automatic water loading pump included for external water supply.
Security System
with display messages, automatic stop device, and warning signals in case of gas leak.
Parallel Connection
Connect up to four stacked generators in a tower configuration.
Touch Screen Display
CPU with touch screen display connectable with CAN-BUS
STANDARD FEATURES
-
Modular configuration
-
Innovative HT PEM cell for high purity
-
Removable water tank for easy cleaning and water change; automatic water loading pump included for external water supply
-
UHP Purity meets the needs required for track analysis
-
Simple maintenance requires only substitution of the deionizing bag and dryer after 50,000L of H2 produced
-
Security system features display messages, automatic stop, and warning signals in case of gas leak
-
Automatic switch with inert gas if hydrogen production stops
-
Parallel connection allows for up to four stacked generators
-
CPU with Touch Screen Display (connectable with CAN BUS) allows you to monitor the operational status
-
CPU is equipped with a LAN connection
SPECS
| Instrument Name | H Series 200/400/600 | |
| Flow Rate |
200 mL/min +/- 10% at 2000 meters above sea level 400 mL/min +/- 10% at 2000 meters above sea level 600 mL/min +/- 10% at 2000 meters above sea level |
|
| Technology Employed | HT PEM electrolytic cell | |
| Output Pressure |
30-116 PSI, 2-8 bar |
|
| Purity |
99.9999% Oxygen < 1 ppm |
|
| Moisture | > -70°C dew point ATP at 20°C | |
| Requirements of Demineralized Water |
Required resistivity >1 MΩ cm @25°C; ASTM Type II Advised resistivity <10 MΩ cm @25°C; ASTM Type I |
|
| Electrical Supply |
115/230 V H200: 110W H400: 180W H600: 250W |
|
| Protection Index |
|
|
| Noise | < 50 dBA | |
| Operating Temperature | 40 °F - 95 °F (5°C - 35°C) | |
| Environmental Humidity |
max 90% without condensation |
|
| Maximum Altitude |
2000 meters above sea level 6561.68 feet above sea level |
|
| Dimensions |
Height: 18.6" (47cm) Width: 14.9" (38cm) Depth: 20.8" (53cm) |
|
| Weight |
67 lbs (30 kg) |
|
| Pneumatic Connections |
Hydrogen Output: G 1/8" female AISI 316 Exhaust: quick coupling for plastic pipe 4mm Input demineralized water: flexible hose with 1/4" connection |
|
| Warranty | 2 years | |
ACCESSORIES
-
Water demineralizer
- Maintenance kit for 9,000 or 18,000 running hours
- Water refill pump
GET A QUOTE