80 Position MULTIVAP
Nitrogen Evaporator
DESCRIPTION
The 80 position MULTIVAP parallel evaporator is a high temperature dry block model. This instrument contains a rectangular gas distribution system mounted on a frame and dual post assembly. The manifold delivers nitrogen gas to the needles or glass pipettes, which direct the gas onto the sample’s surface. This method results in rapid solvent evaporation and sample concentration. In order to conserve nitrogen gas, the manifold has a toggle switch for every row of 8 samples, which allows individual rows to be shut off when evaporating batches of less than 80 samples. Nitrogen gas flow is also controlled by an adjustable flow meter and a built-in pressure regulator.
The 80 position MULTIVAP small vial evaporator uses a heated aluminum dry block to reach evaporative temperatures ranging from 30°C to 120°C. An unheated version is available for evaporations that will be performed at ambient temperatures. Sample blocks are customized, within a range of 10-17 mm, for the user’s sample size for maximum and even heat transfer.
Since the heat block is made-to-order, we will request that you deliver us three sample vials for each unique vial size upon placing an order for a 30, 48 or 80 Position MULTIVAP. In situations where shipping sample vials to Organomation is not possible, we need precise measurements of your sample vials to be taken.
All models can withstand contact with organic solvents; however acid resistant models are also available for use with corrosive solutions.
Capacity
Evaporate batches of up to 80 samples at once, with outside diameters of up to 17 mm
Precise
Digital controls allow exact temperature regulation
Cost-Effective
Conserve gas by using ON/OFF valve for rows not in use
Consistent
Uniform evaporation across all samples with no adjustment needed between runs
STANDARD FEATURES
-
Adjustable flow meter, 0-25 lpm
-
Dual band hoist spring assembly
-
High temperature limit switch for safety
-
Safety control cover plate
-
Digital temperature controller
-
Electronic timer
-
Nitrogen filter
-
Gas distribution manifold
-
Built-in pressure reducing regulator
-
Needle guide
OPTIONS (Add to main Cat# when purchasing)
-
220v wiring harness (Option Code# -2), Cat# 11880-2
-
Z-Purge/positive pressure purge case (Option Code# -Z), Cat# 11880-Z
-
Acid resistant coating on instrument and needles (Option Code# -RT), Cat# 11880-RT
-
Pasteur pipette adapters in place of needles (Option Code -P), Cat# 11880-P
-
Manifold and stand only: no heating platform (Option Code -O), Cat# 11880-O
SPECS
| Instrumental Name | 80 Position MULTIVAP |
|
| Heater Type | Dry Block | None |
| Instrumental Catalog Number | 11880 | 11880-O |
| Number of Sample Positions | 80 | 80 |
| Overall Dimension (w x d x h) | 16 x 14 x 30 in 41 x 36 x 76 cm |
13 x 15 x 26 in
33 x 38 x 66 cm
|
| Sample Holder Layout | Rectangular | Rectangular |
| Gas Manifold Layout | 8 x 10 Array | 8 x 10 Array |
| Center to Center Spacing Between Positions | 0.8 in 2.03 cm |
0.8 in
2.03 cm
|
| Test Tube Diameter | 10-17 mm OD | 10-17 mm OD |
| Gas Flow Control On/Off Valve | Every row of 8 | Every row of 8 |
| Stainless Steel Needles (Length & Gauge) |
4.0 in x 19 ga 102 mm x 19 ga |
4.0 in x 19 ga
102 mm x 19 ga
|
| Needle Guide | Standard | Standard |
| Hoist Assembly | Dual Pulley & Band Springs | Dual Pulley & Band Springs |
| Integrated Control Box with Timer for Nitrogen & Heat | Standard | N/A |
| Built-in Gas Regulator Input | 30-110 psig | 30-110 psig |
| Acid Resistant Coating (Option Code -RT) | Optional | Optional |
| OA-SYS Heating Device Specifications | ||
| Model Number | 9156 | N/A |
| Outside Dimensions | 16 x 14 x 6.5 in 41 x 36 x 15 cm |
N/A |
| Total Wattage | 900 W | N/A |
| Temperature Range | 30-120 °C | Ambient |
| Temperature Controller Type |
Digital Electronic with LED Display | N/A |
| Controller Accuracy | +/- 2 °C | N/A |
RESOURCES
ACCESSORIES
-
Custom sized inserts (cat# NA1881, cat# NA1882)
-
Pasteur pipette adapters (cat# NA0636, cannot be used with needle guide)
-
Luer plugs (cat# NA1307)
-
Pressure reducing regulator 0-160 psi (cat# NA0630)
-
Various needle sizes and gauges